4115 61 Ave SE #2, Calgary, AB T2C 1Z6, Canada+1 825 454 66 97

Catalog

Total found: 487
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KL-040005Archive
4 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KL-040010Archive
4 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 12 mm
4 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 12 mm
EM261-4TL-040Archive
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
EM281-4KL-040002Archive
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
EM281-4KL-040005Archive
3 mm Carbide End Mill, 4 Flutes, Chamfering, Standard length
3 mm Carbide End Mill, 4 Flutes, Chamfering, Standard length
EM321-4EL-030Archive
4 mm Carbide End Mill, 4 Flutes, Chamfering, Standard length
4 mm Carbide End Mill, 4 Flutes, Chamfering, Standard length
EM321-4EL-040Archive
1 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 3 mm
1 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 3 mm
EM311-4KL-010002Archive
1.5 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 4 mm
1.5 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 4 mm
EM311-4KL-015002Archive
2 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 6 mm
2 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 6 mm
EM311-4KL-020002Archive
3 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
3 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4KL-030002Archive
3 mm, 0.3 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
3 mm, 0.3 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4KL-030003Archive
3 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
3 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4KL-030005Archive
4 mm Carbide End Mill, 5 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
4 mm Carbide End Mill, 5 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
EM281-5TL-040Archive
1/8 Carbide end mill, 4 flute, TiAlN, 0.125 shank x 0.5 LOC, helix angle 38, 0.008 chamfer
1/8 Carbide end mill, 4 flute, TiAlN, 0.125 shank x 0.5 LOC, helix angle 38, 0.008 chamfer
A01-4031Archive
4 mm Carbide End Mill, 3 Flutes, Flat, Long, For N materials, Uncoated, Helix angle 45 degree, LOC 16 mm
4 mm Carbide End Mill, 3 Flutes, Flat, Long, For N materials, Uncoated, Helix angle 45 degree, LOC 16 mm
EM356-3TS-040Archive
3 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 8 mm
3 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 8 mm
EM261-4TL-030Archive
3 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 15 mm
3 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 15 mm
EM311-4TS-030Archive
4 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
4 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
EM311-4TS-040Archive
1/4" Carbide Square End Mill, 2 flutes, 0.75" LOC, Uncoated
1/4" Carbide Square End Mill, 2 flutes, 0.75" LOC, Uncoated
80137790Archive
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length
EM321-4KL-040002Archive
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length
EM321-4KL-040005Archive
4 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length
4 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length
EM321-4KL-040010Archive
1/8 Carbide End Mill, 3 flute, Uncoated, 0.125 shank x 0.4375 LOC, helix angle 38
1/8 Carbide End Mill, 3 flute, Uncoated, 0.125 shank x 0.4375 LOC, helix angle 38
A03-1231Archive