4115 61 Ave SE #2, Calgary, AB T2C 1Z6, Canada+1 825 454 66 97

Catalog

Total found: 487
3/16 Carbide End Mill, 3 flute, Uncoated, 0.1875 shank x 0.5625 LOC, helix angle 38
3/16 Carbide End Mill, 3 flute, Uncoated, 0.1875 shank x 0.5625 LOC, helix angle 38
A03-1247Archive
1/16 carbide end mill, 3 flute, uncoated, 0.125 shank x 0.1875 LOC, Helix angle 38
1/16 carbide end mill, 3 flute, uncoated, 0.125 shank x 0.1875 LOC, Helix angle 38
A03-1201Archive
4 mm Carbide End Mill, 0.2 mm Corner Radius, 4 Flutes, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 12 mm
4 mm Carbide End Mill, 0.2 mm Corner Radius, 4 Flutes, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 12 mm
EM261-4KL-040002Archive
2 mm Carbide End Mill, 2 Flutes, Ball Nose, Long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 4 mm
2 mm Carbide End Mill, 2 Flutes, Ball Nose, Long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 4 mm
EM311-2WS-020Archive
3 mm Carbide End Mill, 2 Flutes, Ball Nose, Long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 6 mm
3 mm Carbide End Mill, 2 Flutes, Ball Nose, Long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 6 mm
EM311-2WS-030Archive
4 mm Carbide End Mill, 2 Flutes, Ball Nose, Long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 8 mm
4 mm Carbide End Mill, 2 Flutes, Ball Nose, Long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 8 mm
EM311-2WS-040Archive
3 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
3 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4KS-030005Archive
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KS-040002Archive
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KS-040005Archive
4 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KS-040010Archive
5/16" Carbide Square End Mill, 4 flutes, 0.813" LOC, AlCrN Coated
5/16" Carbide Square End Mill, 4 flutes, 0.813" LOC, AlCrN Coated
80137777Archive
1/4 Carbide End Mill, 3 flute, Uncoated, 0.25 shank x 0.75 LOC, helix angle 38
1/4 Carbide End Mill, 3 flute, Uncoated, 0.25 shank x 0.75 LOC, helix angle 38
A03-1263Archive
4 mm Carbide End Mill, 4 Flutes, Flat, Super-long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 30 mm
4 mm Carbide End Mill, 4 Flutes, Flat, Super-long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 30 mm
EM311-4EX-040Archive
5/16" Carbide Ball Nose End Mill, 2 flutes, 1.125" LOC, AlCrN Coated
5/16" Carbide Ball Nose End Mill, 2 flutes, 1.125" LOC, AlCrN Coated
80137750Archive
6 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 16 mm
6 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 16 mm
EM261-4TL-060Archive
6 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 16 mm
6 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 16 mm
EM281-4TL-060Archive
5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 13 mm
5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 13 mm
EM311-2TL-050Archive
6 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 16 mm
6 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 16 mm
EM311-2TL-060Archive
3 mm, Special Shank Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
3 mm, Special Shank Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4TL-030PArchive
4 mm, Special Shank Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, Special Shank Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4TL-040PArchive
4.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4TL-045Archive
5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 13 mm
5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 13 mm
EM311-4TL-050Archive
5.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
5.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4TL-055Archive
5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree
5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree
EM281-4TL-050Archive