4115 61 Ave SE #2, Calgary, AB T2C 1Z6, Canada+1 825 454 66 97

Catalog

Total found: 487
1.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 4 mm
1.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 4 mm
EM311-2TL-015Archive
2.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
2.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
EM311-2TL-025Archive
3 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
3 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
EM311-2TL-030Archive
4 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 12 mm
4 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 12 mm
EM311-2TL-040Archive
1 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 3 mm
1 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 3 mm
EM311-4TL-010Archive
1.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 4 mm
1.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 4 mm
EM311-4TL-015Archive
2 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 6 mm
2 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 6 mm
EM311-4TL-020Archive
2.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
2.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4TL-025Archive
3 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
3 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 8 mm
EM311-4TL-030Archive
3.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 11 mm
3.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 11 mm
EM311-4TL-035Archive
1/8 Carbide Ball End Mill, 4 flute, Hybrid AlCrN Coated, 0.125 shank x 0.375 LOC, Helix angle 35/37
1/8 Carbide Ball End Mill, 4 flute, Hybrid AlCrN Coated, 0.125 shank x 0.375 LOC, Helix angle 35/37
A06-2031Archive
2 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 4 mm
2 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 4 mm
EM281-2WL-020Archive
3 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 6 mm
3 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 6 mm
EM281-2WL-030Archive
4 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 8 mm
4 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 8 mm
EM281-2WL-040Archive
1 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 4 mm
1 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 4 mm
EM311-4TLH-010Archive
2 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 10 mm
2 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 10 mm
EM311-4TLH-020Archive
3 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
3 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4TLH-030Archive
4 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
4 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4TLH-040Archive
1.5 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 3 mm
1.5 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 3 mm
EM311-2WL-015Archive
2.5 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 5 mm
2.5 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 5 mm
EM311-2WL-025Archive
4 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 8 mm
4 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 8 mm
EM311-2WL-040Archive
4 mm Carbide End Mill, 4 Flutes, Chamfering, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm Carbide End Mill, 4 Flutes, Chamfering, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4EL-040Archive
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KL-040002Archive
4 mm, 0.3 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
4 mm, 0.3 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 12 mm
EM311-4KL-040003Archive