Table size: 39" x 20" (1000 x 500mm). CAT40 or BT40 spindle taper, spindle speed from 8,000 to 12,000 RPM, Fanuc controller starting from a 10-inch display. Build your exact configuration in our online configurator.
The Hision V8 (VMC850II) is a 40-taper vertical machining center with 33.5 × 19.7 × 19.7 in (850 × 500 × 500 mm) of travel. The price covers the standard machine below; spindle, coolant, probing and 4th-axis options are added in the online configurator.
Hision machines are built by Haitian Precision on a modern high-volume production line. Against American and Korean machines of the same size, a V8 with the direct drive spindle, CAT40 taper, through-spindle coolant and Renishaw probing stays under CA$100,000, with comparable spindle power, travels and tool capacity — and its 6,000 kg cast-iron structure is heavier than most American 40-taper machines in this class. Unbranded Chinese machines cost less; the V8 is the factory-built alternative from a large manufacturer, with the factory warranty.
| Travel X / Y / Z | 33.5 × 19.7 × 19.7 in (850 × 500 × 500 mm) |
| Spindle nose to table | 5.9–25.6 in (150–650 mm) |
| Table | 39.4 × 19.7 in (1000 × 500 mm), 5 T-slots 18 mm × 80 mm |
| Max table load | 1,323 lb (600 kg) |
| Spindle | BT40, belt drive, 8,000 rpm |
| Spindle power (cont / max) | 14.8 / 20.1 hp (11 / 15 kW) |
| Spindle torque (cont / max) | 39.0 / 70.4 ft-lbf (52.9 / 95.5 Nm) |
| Rapids X / Y / Z | 1,417 ipm (36 m/min) |
| Max cutting feed | 591 ipm (15 m/min) |
| Tool changer | 24+1, arm type, 2.5 s tool to tool |
| Max tool | Ø 3.1 in (80 mm), Ø 5.9 in (150 mm) with adjacent pockets empty, 11.8 in (300 mm) long, 17.6 lb (8 kg) |
| Control | Fanuc 0i-MF Plus, β-series servo and spindle motors |
| Machine weight | 13,228 lb (6,000 kg) |
| Footprint W × L × H | 8.2 × 11.2 × 8.4 ft (250 × 340 × 255 cm) |
| Power / air | 220 V, 3-phase, 60 Hz / 73–102 psi (0.5–0.7 MPa) |
Full option list with prices — in the configurator.
