4115 61 Ave SE #2, Calgary, AB T2C 1Z6, Canada+1 825 454 66 97

Catalog

Total found: 487
5 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 25 mm
5 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 25 mm
EM311-4TS-050Archive
6 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 25 mm
6 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 25 mm
EM311-4TS-060Archive
6 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
6 mm, 0.2 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4KS-060002Archive
6 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
6 mm, 0.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4KS-060005Archive
6 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
6 mm, 1 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4KS-060010Archive
6 mm, 1.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
6 mm, 1.5 mm Chamfer Carbide End Mill, 4 Flutes, Radius, Long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4KS-060015Archive
3/8" Carbide Square End Mill, 4 flutes, 1.5" LOC, AlCrN Coated
3/8" Carbide Square End Mill, 4 flutes, 1.5" LOC, AlCrN Coated
80137784Archive
4 mm, Special Shank Carbide End Mill, 4 Flutes, Flat, Super-long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
4 mm, Special Shank Carbide End Mill, 4 Flutes, Flat, Super-long, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
EM311-4EX-040PArchive
5 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge with long overall length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 30 mm
5 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge with long overall length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 30 mm
EM311-4TSH-050Archive
6 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge with long overall length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 35 mm
6 mm Carbide End Mill, 4 Flutes, Flat, Long cutting edge with long overall length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 35 mm
EM311-4TSH-060Archive
3/8 Carbide end mill, 4 flute, TiAlN, 0.375 shank x 1.0 LOC, helix angle 38, 0.008 chamfer
3/8 Carbide end mill, 4 flute, TiAlN, 0.375 shank x 1.0 LOC, helix angle 38, 0.008 chamfer
A01-4095Archive
1/2 Carbide end mill, 3 flute, uncoated, 0.5 shank x 1.0 LOC, helix angle 38
1/2 Carbide end mill, 3 flute, uncoated, 0.5 shank x 1.0 LOC, helix angle 38
A03-1270Archive
8 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 20 mm
8 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, S materials, AlTiN/Zr coating, LOC 20 mm
EM261-4TL-080Archive
6 mm Carbide End Mill, 2 Flutes, Ball Nose, Super-long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 12 mm
6 mm Carbide End Mill, 2 Flutes, Ball Nose, Super-long, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 12 mm
EM311-2WB-060Archive
8 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 20 mm
8 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 20 mm
EM281-4TL-080Archive
7 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 20 mm
7 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 20 mm
EM311-2TL-070Archive
8 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 20 mm
8 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 20 mm
EM311-2TL-080Archive
6.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
6.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 16 mm
EM311-4TL-065Archive
7 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
7 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
EM311-4TL-070Archive
7.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
7.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree / 38 degree, LOC 20 mm
EM311-4TL-075Archive
8 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 45 degree, LOC 20 mm
8 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 45 degree, LOC 20 mm
EM356-2TL-080Archive
8 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 20 mm
8 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 20 mm
EM356-3TL-080Archive
8 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 16 mm
8 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 30 degree, LOC 16 mm
EM281-2WL-080Archive
7 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 14 mm
7 mm Carbide End Mill, 2 Flutes, Ball Nose, Standard length, For P, M, K materials, AlCrN coated, Helix angle 30 degree, LOC 14 mm
EM311-2WL-070Archive